Core HVACR Level I – Part A
This course covers the basic principles of heating, ventilating, and air conditioning. Through structured classroom and hands-on skill building, you will learn:

•   safety, trade math, HVAC tools
•   heating and cooling installation
•   gas piping
•   soldering and brazing copper
•   ductwork installation

15 Mon., Jan. 26-May 11 (no class March 30)
6-10 p.m., Aero Park Campus, M-TEC Rm. 155
Instructor: Dennis McQuillan
Cost: $689 (includes training manual)
Code: 9644

HVACR Level I – Part B
Prerequisite for this course is Core HVACR Level I – Part A or equivalent skills. The course covers:

•   A/C installation procedures
•   refrigerant charging and recovery
•   proper evacuation
•   A/C and heating troubleshooting
•   electrical troubleshooting

15 Wed., Jan. 28-May 13 (no class April 1)
6-10 p.m., Aero Park Campus, M-TEC Rm. 226
Instructor: Steven J. Morse
Cost: $659            Code: 9645

HVACR Level II - Part B
Prerequisite for this course is HVACR Level II - Part A or equivalent skills. Through structured classroom activities, learn the following skills and knowledge:

• controls and accessories
• optional equipment
• metering devices
• compressors and heat pumps
• preventive maintenance

15 Mon., Jan. 26-May 11 (no class March 30)
6-10 p.m., Aero Park Campus, M-TEC Rm. 226
Instructor: Glen Breaux
Cost: $599          Code: 9646

HVACR Level III - Part B
Prerequisite for this course is HVACR Level III - Part A. Increase your knowledge and skill base with demonstration, discussion, and hands-on learning. New areas to be covered include:

•   troubleshooting cooling, heat pumps, and accessories
•   commercial heating and cooling systems
•   water and air balance
•   steam systems
•   customer relations

15 Thurs., Jan. 29-May 14 (no class April 2)
6-10 p.m., Aero Park Campus, M-TEC Rm. 220
Instructor: Ernie Moomaw
Cost: $599            Code: 9647

Advanced HVACR and Plumbing Courses
Designed for the HVACR and Plumbing technician who would like to enhance skills and knowledge. These modules provide high-end skills for improved work performance. Specific courses can count toward certificate completion.

Hydronic and Solar Heating Systems
This is an introduction to the basic types of hydronic and solar heating systems and their components. It includes an overview of layout and installation of these systems, and discusses methods of inhibiting corrosion in solar heating systems.

4 Tues., April 14-May 5, 6-10 p.m.
Aero Park Campus, M-TEC Rm. 155
Instructor: Cliff Sedlacek
Cost: $195 (includes text)          Code: 9648

Installing and Servicing Water Heating Systems
Learn how to install water heaters and get the necessary knowledge to troubleshoot and service them. All types of water heaters will be covered, including gas fired, electric, solar, indirect, and on-demand.

4 Tues., March 3-24, 6-10 p.m.
Aero Park Campus, M-TEC Rm. 155
Instructor: Cliff Sedlacek
Cost: $195          Code: 9649